DDR Version V1.06 20220224
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gbdb740d4da-220216 #cjh (Feb 24 2022 - 03:15:33)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(4e081b1b07...) + OK
## Checking uboot 0x00200000 ... sha256(4ded8b645f...) + OK
## Checking fdt 0x00320438 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(6a00298af8...) + OK
## Checking atf-3 0xff100000 ... sha256(19762d10e3...) + OK
## Checking atf-4 0xff009000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(603cfbd25d...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 86.234 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-331-g7380d9813:derrick.huang
NOTICE:  BL31: Built : 19:33:36, Mar 24 2022
INFO:    timer_hp_init no valid 32k timer source, use normal mode
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-dirty # (Aug 06 2022 - 15:34:09 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb57000
Relocation fdt: eb9fa108 - eb9fecd0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big0_s0 675000 uV
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big1_s0 675000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_npu_s0 837500 uV
spi2: RK806: 2
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: HSZN RK3588 R1V1 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
hdmi@fdea0000 disconnected
CLK: (uboot. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
  b0pll 1200000 KHz
  b1pll 1200000 KHz
  lpll 1200000 KHz
  v0pll 24000 KHz
  aupll 786215 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth1: ethernet@fe1c0000, eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe9a71ac0 with size 0x01d87600
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe9a98ec0
     Data Size:    30801928 Bytes = 29.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   b7fbfecb93da51eee3ca8f0b36b850d335551a1c7202ad24d3dbdc32f1407122
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe9a722c0
     Data Size:    158681 Bytes = 155 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   46cf24351d9d1e8491634228d2a946f6cc93de0fac76b3537510f96658a66aac
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0xe9a98ec0 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02160008
  'reserved-memory' cma: addr=10000000 size=10000000
   Using Device Tree in place at 000000000a100000, end 000000000a129bd8
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 525.342 ms

Starting kernel ...

[    0.637004] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.637026] Linux version 5.10.66 (root@1760bd274111) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Wed Aug 10 08:57:46 CST 2022
[    0.647524] Machine model: HSZN RK3588 R1V1 Board
[    0.647594] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.651650] printk: bootconsole [uart8250] enabled
[    0.657661] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.658807] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.659549] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.804202] Zone ranges:
[    0.804449]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.805024]   DMA32    empty
[    0.805293]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.805864] Movable zone start for each node
[    0.806257] Early memory node ranges
[    0.806588]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.807165]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.807743]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.808322] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.852043] psci: probing for conduit method from DT.
[    0.852517] psci: PSCIv1.1 detected in firmware.
[    0.852942] psci: Using standard PSCI v0.2 function IDs
[    0.853424] psci: Trusted OS migration not required
[    0.853875] psci: SMC Calling Convention v1.2
[    0.854665] percpu: Embedded 30 pages/cpu s85352 r8192 d29336 u122880
[    0.855454] Detected VIPT I-cache on CPU0
[    0.855867] CPU features: detected: GIC system register CPU interface
[    0.856460] CPU features: detected: Virtualization Host Extensions
[    0.857034] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.857680] alternatives: patching kernel code
[    0.858386] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.859024] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[    0.862383] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.863571] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.864292] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.872184] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    0.945980] Memory: 7591456K/8108032K available (14910K kernel code, 3200K rwdata, 5684K rodata, 6208K init, 521K bss, 254432K reserved, 262144K cma-reserved)
[    0.947423] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.948056] ftrace: allocating 56587 entries in 222 pages
[    1.048660] ftrace: allocated 222 pages with 6 groups
[    1.049422] rcu: Hierarchical RCU implementation.
[    1.049860] rcu:     RCU event tracing is enabled.
[    1.050278]  Rude variant of Tasks RCU enabled.
[    1.050696] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.056755] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.059422] GICv3: GIC: Using split EOI/Deactivate mode
[    1.059907] GICv3: 480 SPIs implemented
[    1.060260] GICv3: 0 Extended SPIs implemented
[    1.060695] GICv3: Distributor has no Range Selector support
[    1.061222] GICv3: 16 PPIs implemented
[    1.061611] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.062371] ITS [mem 0xfe640000-0xfe65ffff]
[    1.062812] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.063699] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
[    1.064653] ITS: using cache flushing for cmd queue
[    1.065136] ITS [mem 0xfe660000-0xfe67ffff]
[    1.065570] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
[    1.066456] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
[    1.067408] ITS: using cache flushing for cmd queue
[    1.068021] GICv3: using LPI property table @0x0000000100230000
[    1.068710] GIC: using cache flushing for LPI property table
[    1.069236] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000
[    1.070073] random: get_random_bytes called from start_kernel+0x3dc/0x5d0 with crng_init=0
[    1.206463] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.207790] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.208784] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.210643] Console: colour dummy device 80x25
[    1.211082] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.212033] pid_max: default: 32768 minimum: 301
[    1.212606] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.213320] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.215759] rcu: Hierarchical SRCU implementation.
[    1.217035] Platform MSI: msi-controller@fe640000 domain created
[    1.217634] Platform MSI: msi-controller@fe660000 domain created
[    1.218507] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.219294] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.220548] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.222256] Detected VIPT I-cache on CPU1
[    1.222295] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.222314] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000
[    1.222361] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.223705] Detected VIPT I-cache on CPU2
[    1.223739] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.223758] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000
[    1.223803] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.225142] Detected VIPT I-cache on CPU3
[    1.225171] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.225189] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000
[    1.225231] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.226543] CPU features: detected: Spectre-v4
[    1.226547] Detected PIPT I-cache on CPU4
[    1.226563] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.226574] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000
[    1.226601] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.227865] Detected PIPT I-cache on CPU5
[    1.227883] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.227894] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000
[    1.227922] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.229215] Detected PIPT I-cache on CPU6
[    1.229232] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.229242] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000
[    1.229271] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.230523] Detected PIPT I-cache on CPU7
[    1.230541] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.230551] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000
[    1.230579] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.230660] smp: Brought up 1 node, 8 CPUs
[    1.247398] SMP: Total of 8 processors activated.
[    1.247834] CPU features: detected: Privileged Access Never
[    1.248346] CPU features: detected: User Access Override
[    1.248839] CPU features: detected: 32-bit EL0 Support
[    1.249322] CPU features: detected: Common not Private translations
[    1.249899] CPU features: detected: RAS Extension Support
[    1.250397] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.251187] CPU features: detected: CRC32 instructions
[    1.251662] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.252306] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.252940] CPU: All CPU(s) started at EL2
[    1.254740] devtmpfs: initialized
[    1.265472] Registered cp15_barrier emulation handler
[    1.265949] Registered setend emulation handler
[    1.266454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.267375] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.270610] pinctrl core: initialized pinctrl subsystem
[    1.271528] NET: Registered protocol family 16
[    1.272921] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.273693] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.275021] thermal_sys: Registered thermal governor 'fair_share'
[    1.275023] thermal_sys: Registered thermal governor 'step_wise'
[    1.275591] thermal_sys: Registered thermal governor 'user_space'
[    1.276151] thermal_sys: Registered thermal governor 'power_allocator'
[    1.276858] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.278247] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.279021] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.279796] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.280569] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.281343] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.282110] cpuidle: using governor menu
[    1.282482] Registered FIQ tty driver
[    1.282996] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.283753] ASID allocator initialised with 65536 entries
[    1.286069] printk: console [ramoops-1] enabled
[    1.286492] pstore: Registered ramoops as persistent store backend
[    1.287069] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.331916] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.332764] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.333591] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.334457] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.335328] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.335967] rockchip-pinctrl pinctrl: probed pinctrl
[    1.350197] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.350715] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.351261] fiq_debugger_probe: could not install nmi irq handler
[ [    1.351873] printk: console [ttyFIQ0] enabled
   1.351873] printk: console [ttyFIQ0] enabled
[    1.352658] printk: bootconsole [uart8250] disabled
[    1.352658] printk: bootconsole [uart8250] disabled
[    1.353210] Registered fiq debugger ttyFIQ0
[    1.353566] vcc5v0_sys: supplied by vcc12v_dcin
[    1.353704] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.353834] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.354068] vbus5v0_typec: supplied by vcc5v0_usb
[    1.354197] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.354375] vcc5v0_host: supplied by vcc5v0_usb
[    1.354880] iommu: Default domain type: Translated 
[    1.354963] rk_iommu fdab9000.iommu: version = 2
[    1.355348] rk_iommu fdb50800.iommu: version = 2
[    1.355585] rk_iommu fdb60f00.iommu: version = 2
[    1.355775] rk_iommu fdb70f00.iommu: version = 2
[    1.355944] rk_iommu fdb90480.iommu: version = 2
[    1.356126] rk_iommu fdba0800.iommu: version = 2
[    1.356311] rk_iommu fdba4800.iommu: version = 2
[    1.356493] rk_iommu fdba8800.iommu: version = 2
[    1.356676] rk_iommu fdbac800.iommu: version = 2
[    1.356859] rk_iommu fdbb0800.iommu: version = 2
[    1.357039] rk_iommu fdbdf000.iommu: version = 2
[    1.357277] rk_iommu fdbef000.iommu: version = 2
[    1.357532] rk_iommu fdc38700.iommu: version = 2
[    1.357786] rk_iommu fdc48700.iommu: version = 2
[    1.357954] rk_iommu fdd97e00.iommu: version = 2
[    1.358288] SCSI subsystem initialized
[    1.358376] usbcore: registered new interface driver usbfs
[    1.358394] usbcore: registered new interface driver hub
[    1.358411] usbcore: registered new device driver usb
[    1.358449] mc: Linux media interface: v0.10
[    1.358461] videodev: Linux video capture interface: v2.00
[    1.358490] pps_core: LinuxPPS API ver. 1 registered
[    1.358494] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.358503] PTP clock support registered
[    1.358769] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.358809] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.359910] Advanced Linux Sound Architecture Driver Initialized.
[    1.360116] Bluetooth: Core ver 2.22
[    1.360133] NET: Registered protocol family 31
[    1.360137] Bluetooth: HCI device and connection manager initialized
[    1.360144] Bluetooth: HCI socket layer initialized
[    1.360149] Bluetooth: L2CAP socket layer initialized
[    1.360157] Bluetooth: SCO socket layer initialized
[    1.361464] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    1.361471] rockchip-cpuinfo cpuinfo: Serial         : 540b48857faab6f3
[    1.361830] clocksource: Switched to clocksource arch_sys_counter
[    1.646832] NET: Registered protocol family 2
[    1.647001] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.648931] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    1.649031] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.649373] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.650148] TCP: Hash tables configured (established 65536 bind 65536)
[    1.650206] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.650360] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.650579] NET: Registered protocol family 1
[    1.650883] RPC: Registered named UNIX socket transport module.
[    1.650891] RPC: Registered udp transport module.
[    1.650895] RPC: Registered tcp transport module.
[    1.650898] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.651352] PCI: CLS 0 bytes, default 64
[    1.652412] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.654406] Initialise system trusted keyrings
[    1.654483] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    1.656739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.657011] NFS: Registering the id_resolver key type
[    1.657024] Key type id_resolver registered
[    1.657028] Key type id_legacy registered
[    1.657047] ntfs: driver 2.1.32 [Flags: R/O].
[    1.657114] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.657183] fuse: init (API version 7.32)
[    1.657315] SGI XFS with security attributes, no debug enabled
[    1.678182] NET: Registered protocol family 38
[    1.678193] Key type asymmetric registered
[    1.678197] Asymmetric key parser 'x509' registered
[    1.678215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.678220] io scheduler mq-deadline registered
[    1.678224] io scheduler kyber registered
[    1.687115] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    1.687896] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[    1.690367] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    1.690423] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    1.690513] pwm-backlight backlight: supply power not found, using dummy regulator
[    1.690725] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    1.690732] mpp_service mpp-srv: 15e4fdd7e064 author: Herman Chen 2022-04-13 video: rockchip: mpp: rkvenc2: Fix dchs conflict
[    1.690739] mpp_service mpp-srv: probe start
[    1.690745] rk-pcie fe170000.pcie: IRQ msi not found
[    1.690755] rk-pcie fe170000.pcie: use outband MSI support
[    1.690765] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.690785] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    1.690812] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    1.690833] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    1.690855] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    1.690871] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    1.690912] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.690949] rk-pcie fe170000.pcie: invalid resource
[    1.692153] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    1.692373] mpp_vdpu2 fdb50400.vdpu: probe device
[    1.692495] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.692500] vdpu_init:498: No aclk reset resource define
[    1.692505] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.692509] vdpu_init:501: No hclk reset resource define
[    1.692617] mpp_vdpu2 fdb50400.vdpu: probing finish
[    1.692810] mpp_vepu2 jpege-ccu: probing start
[    1.692817] mpp_vepu2 jpege-ccu: probing finish
[    1.692932] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    1.693024] mpp_vepu2 fdba0000.jpege-core: probing start
[    1.693149] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    1.693245] mpp_vepu2 fdba0000.jpege-core: probing finish
[    1.693327] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    1.693419] mpp_vepu2 fdba4000.jpege-core: probing start
[    1.693550] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    1.693639] mpp_vepu2 fdba4000.jpege-core: probing finish
[    1.693722] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    1.693816] mpp_vepu2 fdba8000.jpege-core: probing start
[    1.693943] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    1.694037] mpp_vepu2 fdba8000.jpege-core: probing finish
[    1.694108] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    1.694203] mpp_vepu2 fdbac000.jpege-core: probing start
[    1.694329] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    1.694418] mpp_vepu2 fdbac000.jpege-core: probing finish
[    1.694692] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    1.694793] mpp-iep2 fdbb0000.iep: probe device
[    1.694942] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    1.695027] mpp-iep2 fdbb0000.iep: probing finish
[    1.695229] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    1.695401] mpp_jpgdec fdb90000.jpegd: probe device
[    1.695609] mpp_jpgdec fdb90000.jpegd: probing finish
[    1.695952] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    1.696017] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    1.696115] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    1.696367] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    1.696502] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    1.696508] rkvdec2_init:697: No niu aclk reset resource define
[    1.696513] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    1.696517] rkvdec2_init:700: No niu hclk reset resource define
[    1.696568] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    1.696573] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    1.696658] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
[    1.696662] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
[    1.696667] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
[    1.696671] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    1.696676] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    1.696707] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    1.696795] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    1.697014] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    1.697145] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    1.697150] rkvdec2_init:697: No niu aclk reset resource define
[    1.697155] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    1.697159] rkvdec2_init:700: No niu hclk reset resource define
[    1.697197] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    1.697223] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    1.697307] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
[    1.697312] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
[    1.697316] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
[    1.697320] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    1.697325] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    1.697357] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    1.697550] mpp_rkvenc2 rkvenc-ccu: probing start
[    1.697556] mpp_rkvenc2 rkvenc-ccu: probing finish
[    1.697668] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    1.697856] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    1.697876] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    1.698030] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    1.698125] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    1.698191] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    1.698379] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    1.698397] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    1.698587] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    1.698683] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    1.699203] mpp_av1dec: Adding child /av1d@fdc70000
[    1.699455] mpp_av1dec: register device av1d-master
[    1.699478] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    1.699500] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    1.699509] mpp_av1dec av1d-master: Adding to iommu group 15
[    1.699721] mpp_av1dec av1d-master: probing start
[    1.699949] mpp_av1dec av1d-master: probing finish
[    1.699990] mpp_service mpp-srv: probe success
[    1.708778] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.708790] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.709907] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.709917] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.711036] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.711046] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.712455] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    1.712537] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    1.712604] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    1.712667] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    1.712728] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    1.713425] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.714325] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    1.715945] random: fast init done
[    1.716043] random: crng init done
[    1.716814] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[    1.724704] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    1.724721] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    1.724740] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    1.724751] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    1.724993] [drm] unsupported AFBC format[3231564e]
[    1.725038] [drm] failed to init overlay plane Cluster0-win1
[    1.725085] [drm] failed to init overlay plane Cluster1-win1
[    1.725135] [drm] failed to init overlay plane Cluster2-win1
[    1.725192] [drm] failed to init overlay plane Cluster3-win1
[    1.739233] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010f83fe0)
[    1.739953] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    1.740190] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010f8bcb8)
[    1.740827] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    1.740995] debugfs: Directory 'dw-hdmi' with parent '/' already present!
[    1.741005] dwhdmi-rockchip fdea0000.hdmi: failed to create debugfs dir!
[    1.741044] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010f8bcb8)
[    1.741586] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    1.741675] rockchip-drm display-subsystem: connector[HDMI-A-2] can't found any modes
[    1.741684] rockchip-drm display-subsystem: can't not find any logo display
[    1.741693] rockchip-drm display-subsystem: failed to show kernel logo
[    1.741720] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    1.742315] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    1.750146] brd: module loaded
[    1.753912] loop: module loaded
[    1.754174] zram: Added device: zram0
[    1.754350] lkdtm: No crash points registered, enable through debugfs
[    1.754462] system_heap: orders[0] = 6
[    1.754473] system_heap: orders[1] = 4
[    1.754478] system_heap: orders[2] = 0
[    1.755765] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    1.755858] ahci fe210000.sata: supply phy not found, using dummy regulator
[    1.755991] ahci fe210000.sata: supply target not found, using dummy regulator
[    1.756064] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    1.756092] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.756101] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.756112] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    1.756870] scsi host0: ahci
[    1.757037] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 66
[    1.757140] ahci fe230000.sata: supply ahci not found, using dummy regulator
[    1.757218] ahci fe230000.sata: supply phy not found, using dummy regulator
[    1.757341] ahci fe230000.sata: supply target not found, using dummy regulator
[    1.757408] ahci fe230000.sata: forcing port_map 0x0 -> 0x1
[    1.757431] ahci fe230000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.757440] ahci fe230000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.757448] ahci fe230000.sata: port 0 can do FBS, forcing FBSCP
[    1.757929] scsi host1: ahci
[    1.758049] ata2: SATA max UDMA/133 mmio [mem 0xfe230000-0xfe230fff] port 0x100 irq 67
[    1.759298] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    1.760734] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    1.760957] rk806 spi2.0: ON: 0x40 OFF:0x0
[    1.762970] vdd_gpu_s0: supplied by vcc5v0_sys
[    1.763668] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    1.764406] vdd_log_s0: supplied by vcc5v0_sys
[    1.765071] vdd_vdenc_s0: supplied by vcc5v0_sys
[    1.765831] vdd_ddr_s0: supplied by vcc5v0_sys
[    1.766289] vdd2_ddr_s3: supplied by vcc5v0_sys
[    1.767005] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    1.767664] vcc_3v3_s3: supplied by vcc5v0_sys
[    1.768246] vddq_ddr_s0: supplied by vcc5v0_sys
[    1.768989] vcc_1v8_s3: supplied by vcc5v0_sys
[    1.769620] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    1.770306] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    1.770917] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    1.771531] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    1.772145] nldo5_s0: supplied by vcc_1v1_nldo_s3
[    1.772803] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.773635] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.774404] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    1.775181] vcc_3v3_s0: supplied by vcc5v0_sys
[    1.775793] vccio_sd_s0: supplied by vcc5v0_sys
[    1.776418] pldo6_s3: supplied by vcc5v0_sys
[    1.777013] rk806 spi2.0: no sleep-setting state
[    1.777022] rk806 spi2.0: no reset-setting pinctrl state
[    1.777028] rk806 spi2.0: no dvs-setting pinctrl state
[    1.779460] libphy: Fixed MDIO Bus: probed
[    1.780303] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    1.780462] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
[    1.780470] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    1.780478] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
[    1.780484] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    1.780491] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[    1.780502] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    1.780511] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    1.780519] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    1.780536] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    1.780756] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    1.780901] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.780910] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
[    1.780917] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    1.780924] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    1.780930] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    1.780935] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    1.780978] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    1.780984] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.780992] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    1.780998] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    1.781004] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    1.896323] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.911834] libphy: stmmac: probed
[    1.913868] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    1.914110] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    1.914119] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    1.914126] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).
[    1.914132] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    1.914139] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    1.914150] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    1.914158] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    1.914165] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    1.914183] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    1.914406] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    1.914547] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.914555] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    1.914562] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    1.914568] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    1.914574] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    1.914580] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    1.914619] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    1.914625] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.914632] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    1.914638] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    1.914645] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    1.921867] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.948527] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.975193] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.001860] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.028527] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.045169] libphy: stmmac: probed
[    2.047113] usbcore: registered new interface driver rtl8150
[    2.047148] usbcore: registered new interface driver r8152
[    2.055195] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.060745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.060762] ehci-pci: EHCI PCI platform driver
[    2.060792] ehci-platform: EHCI generic platform driver
[    2.063243] ehci-platform fc800000.usb: EHCI Host Controller
[    2.063353] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.063423] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    2.068294] ata1: SATA link down (SStatus 0 SControl 300)
[    2.071622] ata2: SATA link down (SStatus 0 SControl 300)
[    2.075181] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.075289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.075297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.075304] usb usb1: Product: EHCI Host Controller
[    2.075310] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.075316] usb usb1: SerialNumber: fc800000.usb
[    2.075568] hub 1-0:1.0: USB hub found
[    2.075591] hub 1-0:1.0: 1 port detected
[    2.078210] ehci-platform fc880000.usb: EHCI Host Controller
[    2.078305] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.078369] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    2.081865] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.088513] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.088610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.088618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.088625] usb usb2: Product: EHCI Host Controller
[    2.088631] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.088637] usb usb2: SerialNumber: fc880000.usb
[    2.088871] hub 2-0:1.0: USB hub found
[    2.088891] hub 2-0:1.0: 1 port detected
[    2.089299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.089313] ohci-platform: OHCI generic platform driver
[    2.089489] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.089577] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.089639] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    2.108528] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.135196] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.149262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.149273] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.149280] usb usb3: Product: Generic Platform OHCI controller
[    2.149286] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.149292] usb usb3: SerialNumber: fc840000.usb
[    2.149524] hub 3-0:1.0: USB hub found
[    2.149550] hub 3-0:1.0: 1 port detected
[    2.149877] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.149972] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.150028] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    2.209270] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.209283] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.209289] usb usb4: Product: Generic Platform OHCI controller
[    2.209295] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.209301] usb usb4: SerialNumber: fc8c0000.usb
[    2.209530] hub 4-0:1.0: USB hub found
[    2.209551] hub 4-0:1.0: 1 port detected
[    2.210227] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.210240] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.210329] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    2.210431] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.210460] xhci-hcd xhci-hcd.9.auto: irq 121, io mem 0xfc400000
[    2.210617] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.210625] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.210631] usb usb5: Product: xHCI Host Controller
[    2.210637] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.210643] usb usb5: SerialNumber: xhci-hcd.9.auto
[    2.210873] hub 5-0:1.0: USB hub found
[    2.210896] hub 5-0:1.0: 1 port detected
[    2.211068] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.211147] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    2.211159] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    2.211196] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.211258] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.211265] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.211271] usb usb6: Product: xHCI Host Controller
[    2.211277] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.211283] usb usb6: SerialNumber: xhci-hcd.9.auto
[    2.211513] hub 6-0:1.0: USB hub found
[    2.211533] hub 6-0:1.0: 1 port detected
[    2.211767] usbcore: registered new interface driver cdc_acm
[    2.211774] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.211949] usbcore: registered new interface driver uas
[    2.212019] usbcore: registered new interface driver usb-storage
[    2.212065] usbcore: registered new interface driver usbserial_generic
[    2.212080] usbserial: USB Serial support registered for generic
[    2.212104] usbcore: registered new interface driver cp210x
[    2.212117] usbserial: USB Serial support registered for cp210x
[    2.212159] usbcore: registered new interface driver ftdi_sio
[    2.212173] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.212284] usbcore: registered new interface driver keyspan
[    2.212299] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.212313] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.212327] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.212340] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.212366] usbcore: registered new interface driver option
[    2.212379] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.212533] usbcore: registered new interface driver oti6858
[    2.212546] usbserial: USB Serial support registered for oti6858
[    2.212569] usbcore: registered new interface driver pl2303
[    2.212583] usbserial: USB Serial support registered for pl2303
[    2.212614] usbcore: registered new interface driver qcserial
[    2.212628] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.212665] usbcore: registered new interface driver sierra
[    2.212678] usbserial: USB Serial support registered for Sierra USB modem
[    2.213242] usbcore: registered new interface driver usbtouchscreen
[    2.214342] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.7.auto/input/input0
[    2.214645] i2c /dev entries driver
[    2.217802] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.225849] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.234531] vdd_npu_s0: supplied by vcc5v0_sys
[    2.264507] rtc-hym8563 6-0051: rtc information is valid
[    2.270219] rtc-hym8563 6-0051: registered as rtc0
[    2.271295] rtc-hym8563 6-0051: setting system clock to 2000-01-01T00:30:02 UTC (946686602)
[    2.278214] usbcore: registered new interface driver uvcvideo
[    2.278227] USB Video Class driver (1.1.1)
[    2.279544] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.280203] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.280581] Bluetooth: HCI UART driver ver 2.3
[    2.280590] Bluetooth: HCI UART protocol H4 registered
[    2.280595] Bluetooth: HCI UART protocol ATH3K registered
[    2.280628] usbcore: registered new interface driver bfusb
[    2.280660] usbcore: registered new interface driver btusb
[    2.281043] cpu cpu0: leakage=10
[    2.282567] cpu cpu0: pvtm=1435
[    2.282680] cpu cpu0: pvtm-volt-sel=2
[    2.283235] cpu cpu4: leakage=8
[    2.289849] cpu cpu4: pvtm=1670
[    2.293866] cpu cpu4: pvtm-volt-sel=1
[    2.295169] cpu cpu6: leakage=8
[    2.301719] cpu cpu6: pvtm=1673
[    2.305700] cpu cpu6: pvtm-volt-sel=1
[    2.307487] cpu cpu0: avs=0
[    2.308337] cpu cpu4: avs=0
[    2.309209] cpu cpu6: avs=0
[    2.309504] cpu cpu0: EM: created perf domain
[    2.309568] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.310328] cpu cpu4: EM: created perf domain
[    2.310381] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.312755] cpu cpu6: EM: created perf domain
[    2.313143] cpu cpu6: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.316184] sdhci: Secure Digital Host Controller Interface driver
[    2.316203] sdhci: Copyright(c) Pierre Ossman
[    2.316208] Synopsys Designware Multimedia Card Interface Driver
[    2.316770] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.317318] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.317357] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.317369] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.317413] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
[    2.317793] leds-gpio: probe of leds failed with error -16
[    2.317866] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.317896] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.318568] cryptodev: driver 1.12 loaded.
[    2.318598] hid: raw HID events driver (C) Jiri Kosina
[    2.318746] usbcore: registered new interface driver usbhid
[    2.318752] usbhid: USB HID core driver
[    2.322490] optee: probing for conduit method.
[    2.322510] optee: revision 3.13 (8e053a88)
[    2.322876] optee: initialized driver
[    2.323377] usbcore: registered new interface driver snd-usb-audio
[    2.325241] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.331129] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    2.332353] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2
[    2.333188] input: headset-keys as /devices/platform/es8388-sound/input/input3
[    2.336087] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.344350] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    2.351225] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.388059] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.388510] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB 
[    2.388631] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
[    2.388751] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
[    2.388869] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB, chardev (236:0)
[    2.391357]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[    2.394400] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card2/input4
[    2.395734] Initializing XFRM netlink socket
[    2.396069] NET: Registered protocol family 10
[    2.396978] Segment Routing with IPv6
[    2.397030] NET: Registered protocol family 17
[    2.397044] NET: Registered protocol family 15
[    2.397306] Bluetooth: RFCOMM socket layer initialized
[    2.397330] Bluetooth: RFCOMM ver 1.11
[    2.397341] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.397349] Bluetooth: HIDP socket layer initialized
[    2.397379] [BT_RFKILL]: Enter rfkill_rk_init
[    2.397385] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.397726] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.397753] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.397759] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275P
[    2.397765] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.397770] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.397788] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
[    2.397811] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.397816] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.397822] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.397828] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.398039] Key type dns_resolver registered
[    2.398978] Loading compiled-in X.509 certificates
[    2.399596] pstore: Using crash dump compression: deflate
[    2.399803] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.399970] rga: rga3_core0_irq, irq = 32, match scheduler
[    2.400283] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    2.400302] rga: rga3_core0 probe successfully
[    2.400587] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.400724] rga: rga3_core1_irq, irq = 33, match scheduler
[    2.401002] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    2.401018] rga: rga3_core1 probe successfully
[    2.401319] rga: rga2_irq, irq = 34, match scheduler
[    2.401499] rga: rga2 driver loaded successfully ver:3.2.63318
[    2.401509] rga: rga2 probe successfully
[    2.401789] rga: Module initialized. v1.2.7
[    2.413147] vendor storage:20190527 ret = 0
[    2.428824] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.429006] mali fb000000.gpu: Kernel DDK version g11p0-01eac0
[    2.429590] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.430026] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.430303] mali fb000000.gpu: leakage=13
[    2.430433] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.431009] vcc3v3_lcd0_n: supplied by vcc_1v8_s3
[    2.431566] vcc3v3_pcie30: supplied by vcc_3v3_s0
[    2.431857] mali fb000000.gpu: pvtm=874
[    2.431910] mali fb000000.gpu: pvtm-volt-sel=2
[    2.432344] input: adc-keys as /devices/platform/adc-keys/input/input5
[    2.432757] mali fb000000.gpu: avs=0
[    2.433438] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.433687] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
[    2.433699] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.433799] mali fb000000.gpu: No priority control manager is configured
[    2.433809] mali fb000000.gpu: No memory group manager is configured
[    2.433835] mali fb000000.gpu: Protected memory allocator not available
[    2.434494] mali fb000000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.435440] mali fb000000.gpu: Probed as mali0
[    2.436756] RKNPU fdab0000.npu: Adding to iommu group 0
[    2.436897] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    2.438137] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    2.438170] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    2.438185] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    2.438435] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
[    2.440339] RKNPU fdab0000.npu: leakage=7
[    2.447672] RKNPU fdab0000.npu: pvtm=848
[    2.451891] RKNPU fdab0000.npu: pvtm-volt-sel=1
[    2.453262] RKNPU fdab0000.npu: avs=0
[    2.453514] RKNPU fdab0000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.458714] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    2.461458] RKNPU fdab0000.npu: failed to find power_model node
[    2.461488] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    2.461500] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    2.462039] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.464496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.465450] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.465464] cfg80211: failed to load regulatory.db
[    2.466638] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    2.467637] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:01:29', on 'Aug 10 2022'.
[    2.468074] Mali: 
[    2.468078] Mali device driver loaded
[    2.468095] ALSA device list:
[    2.468103]   #0: rockchip-hdmi0
[    2.468111]   #1: rockchip-hdmi1
[    2.468118]   #2: rockchip-es8388
[    2.468125]   #3: rockchip,hdmiin
[    2.472956] usb 1-1: New USB device found, idVendor=1a86, idProduct=55d5, bcdDevice=80.46
[    2.472966] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.472973] usb 1-1: Product: USB Quad_Serial
[    2.472979] usb 1-1: Manufacturer: wch.cn
[    2.472985] usb 1-1: SerialNumber: 0123456789
[    2.477349] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[    2.482106] cdc_acm 1-1:1.2: ttyACM1: USB ACM device
[    2.485212] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    2.485394] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    2.485413] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.485428] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    2.485443] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
[    2.485456] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    2.485469] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    2.485514] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    2.485549] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.485627] pci 0002:20:00.0: supports D1 D2
[    2.485639] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.486726] EXT4-fs (mmcblk1p6): recovery complete
[    2.487252] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.487288] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    2.487570] devtmpfs: mounted
[    2.490644] Freeing unused kernel memory: 6208K
[    2.494469] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.494491] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.494763] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
[    2.494861] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    2.494922] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    2.495715] pci 0002:21:00.0: supports D1 D2
[    2.495727] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.497249] cdc_acm 1-1:1.4: ttyACM2: USB ACM device
[    2.502587] cdc_acm 1-1:1.6: ttyACM3: USB ACM device
[    2.514160] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.514290] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
[    2.514308] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    2.514329] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
[    2.514385] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
[    2.514439] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.514482] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
[    2.515377] Run /sbin/init as init process
[    2.517735] pcieport 0002:20:00.0: PME: Signaling with IRQ 134
[    2.547824] EXT4-fs (mmcblk1p6): re-mounted. Opts: (null)
Starting syslogd: OK
Starting klogd: OK
Running sysctl: [    2.599079] usb 5-1: New USB device found, idVendor=0424, idProduct=2734, bcdDevice= 2.02
[    2.599107] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.599114] usb 5-1: Product: USB2734
[    2.599120] usb 5-1: Manufacturer: Microchip Tech
OK
/usr/bin/modetest
Populating /dev using udev: [    2.657262] udevd[281]: starting version 3.2.10
[    2.659508] hub 5-1:1.0: USB hub found
[    2.659593] hub 5-1:1.0: 5 ports detected
[    2.673785] udevd[282]: starting eudev-3.2.10
[    2.728568] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.745599] usb 6-1: New USB device found, idVendor=0424, idProduct=5734, bcdDevice= 2.02
[    2.745624] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    2.745631] usb 6-1: Product: USB5734
[    2.745638] usb 6-1: Manufacturer: Microchip Tech
[    2.771914] hub 6-1:1.0: USB hub found
[    2.772019] hub 6-1:1.0: 5 ports detected
done
Initializing random number generator: OK
Saving random seed: OK
Will now mount all partitions in /etc/fstab
Note: Will skip fsck, remove /.skip_fsck to enable
Handling rootfs: /dev/mmcblk1p6 / ext2 rw,noauto 1
