DDR Version V1.06 20220224
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gbdb740d4da-220216 #cjh (Feb 24 2022 - 03:15:33)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(4e081b1b07...) + OK
## Checking uboot 0x00200000 ... sha256(4ded8b645f...) + OK
## Checking fdt 0x00320438 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(6a00298af8...) + OK
## Checking atf-3 0xff100000 ... sha256(19762d10e3...) + OK
## Checking atf-4 0xff009000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(603cfbd25d...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 86.340 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-331-g7380d9813:derrick.huang
NOTICE:  BL31: Built : 19:33:36, Mar 24 2022
INFO:    timer_hp_init no valid 32k timer source, use normal mode
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-dirty # (Aug 06 2022 - 15:34:09 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb57000
Relocation fdt: eb9fa108 - eb9fecd0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big0_s0 675000 uV
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big1_s0 675000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_npu_s0 837500 uV
spi2: RK806: 2
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: HSZN RK3588 R1V1 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
hdmi@fdea0000 disconnected
CLK: (uboot. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
  b0pll 1200000 KHz
  b1pll 1200000 KHz
  lpll 1200000 KHz
  v0pll 24000 KHz
  aupll 786215 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth1: ethernet@fe1c0000, eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe9a71ac0 with size 0x01d87600
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe9a98ec0
     Data Size:    30801928 Bytes = 29.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   b7fbfecb93da51eee3ca8f0b36b850d335551a1c7202ad24d3dbdc32f1407122
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe9a722c0
     Data Size:    158681 Bytes = 155 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   46cf24351d9d1e8491634228d2a946f6cc93de0fac76b3537510f96658a66aac
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0xe9a98ec0 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02160008
  'reserved-memory' cma: addr=10000000 size=10000000
   Using Device Tree in place at 000000000a100000, end 000000000a129bd8
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 525.144 ms

Starting kernel ...

[    0.636765] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.636788] Linux version 5.10.66 (root@1760bd274111) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Wed Aug 10 08:57:46 CST 2022
[    0.647289] Machine model: HSZN RK3588 R1V1 Board
[    0.647358] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.651416] printk: bootconsole [uart8250] enabled
[    0.657426] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.658571] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.659314] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.803964] Zone ranges:
[    0.804211]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.804785]   DMA32    empty
[    0.805055]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.805625] Movable zone start for each node
[    0.806018] Early memory node ranges
[    0.806349]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.806926]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.807504]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.808083] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.851802] psci: probing for conduit method from DT.
[    0.852277] psci: PSCIv1.1 detected in firmware.
[    0.852703] psci: Using standard PSCI v0.2 function IDs
[    0.853186] psci: Trusted OS migration not required
[    0.853638] psci: SMC Calling Convention v1.2
[    0.854429] percpu: Embedded 30 pages/cpu s85352 r8192 d29336 u122880
[    0.855217] Detected VIPT I-cache on CPU0
[    0.855630] CPU features: detected: GIC system register CPU interface
[    0.856224] CPU features: detected: Virtualization Host Extensions
[    0.856797] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.857443] alternatives: patching kernel code
[    0.858149] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.858787] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[    0.862143] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.863332] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.864054] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.871946] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    0.945661] Memory: 7591456K/8108032K available (14910K kernel code, 3200K rwdata, 5684K rodata, 6208K init, 521K bss, 254432K reserved, 262144K cma-reserved)
[    0.947103] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.947736] ftrace: allocating 56587 entries in 222 pages
[    1.048353] ftrace: allocated 222 pages with 6 groups
[    1.049112] rcu: Hierarchical RCU implementation.
[    1.049549] rcu:     RCU event tracing is enabled.
[    1.049967]  Rude variant of Tasks RCU enabled.
[    1.050385] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.056468] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.059158] GICv3: GIC: Using split EOI/Deactivate mode
[    1.059644] GICv3: 480 SPIs implemented
[    1.059999] GICv3: 0 Extended SPIs implemented
[    1.060434] GICv3: Distributor has no Range Selector support
[    1.060960] GICv3: 16 PPIs implemented
[    1.061349] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.062110] ITS [mem 0xfe640000-0xfe65ffff]
[    1.062551] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.063440] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
[    1.064394] ITS: using cache flushing for cmd queue
[    1.064877] ITS [mem 0xfe660000-0xfe67ffff]
[    1.065312] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
[    1.066198] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
[    1.067150] ITS: using cache flushing for cmd queue
[    1.067765] GICv3: using LPI property table @0x0000000100230000
[    1.068454] GIC: using cache flushing for LPI property table
[    1.068981] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000
[    1.069817] random: get_random_bytes called from start_kernel+0x3dc/0x5d0 with crng_init=0
[    1.206079] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.207402] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.208397] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.210255] Console: colour dummy device 80x25
[    1.210694] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.211645] pid_max: default: 32768 minimum: 301
[    1.212216] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.212927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.215368] rcu: Hierarchical SRCU implementation.
[    1.216643] Platform MSI: msi-controller@fe640000 domain created
[    1.217242] Platform MSI: msi-controller@fe660000 domain created
[    1.218106] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.218892] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.220152] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.221859] Detected VIPT I-cache on CPU1
[    1.221898] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.221917] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000
[    1.221965] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.223310] Detected VIPT I-cache on CPU2
[    1.223343] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.223362] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000
[    1.223407] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.224766] Detected VIPT I-cache on CPU3
[    1.224796] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.224815] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000
[    1.224857] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.226173] CPU features: detected: Spectre-v4
[    1.226178] Detected PIPT I-cache on CPU4
[    1.226194] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.226204] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000
[    1.226232] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.227496] Detected PIPT I-cache on CPU5
[    1.227513] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.227524] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000
[    1.227553] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.228846] Detected PIPT I-cache on CPU6
[    1.228863] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.228874] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000
[    1.228902] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.230150] Detected PIPT I-cache on CPU7
[    1.230167] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.230178] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000
[    1.230206] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.230287] smp: Brought up 1 node, 8 CPUs
[    1.247003] SMP: Total of 8 processors activated.
[    1.247440] CPU features: detected: Privileged Access Never
[    1.247954] CPU features: detected: User Access Override
[    1.248444] CPU features: detected: 32-bit EL0 Support
[    1.248927] CPU features: detected: Common not Private translations
[    1.249506] CPU features: detected: RAS Extension Support
[    1.250004] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.250795] CPU features: detected: CRC32 instructions
[    1.251269] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.251913] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.252549] CPU: All CPU(s) started at EL2
[    1.254345] devtmpfs: initialized
[    1.265069] Registered cp15_barrier emulation handler
[    1.265547] Registered setend emulation handler
[    1.266052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.266972] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.270171] pinctrl core: initialized pinctrl subsystem
[    1.271088] NET: Registered protocol family 16
[    1.272475] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.273246] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.274556] thermal_sys: Registered thermal governor 'fair_share'
[    1.274559] thermal_sys: Registered thermal governor 'step_wise'
[    1.275127] thermal_sys: Registered thermal governor 'user_space'
[    1.275687] thermal_sys: Registered thermal governor 'power_allocator'
[    1.276394] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.277783] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.278557] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.279331] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.280104] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.280878] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.281645] cpuidle: using governor menu
[    1.282017] Registered FIQ tty driver
[    1.282526] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.283283] ASID allocator initialised with 65536 entries
[    1.285604] printk: console [ramoops-1] enabled
[    1.286027] pstore: Registered ramoops as persistent store backend
[    1.286603] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.331582] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.332431] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.333259] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.334125] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.334994] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.335632] rockchip-pinctrl pinctrl: probed pinctrl
[    1.349869] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.350388] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.350936] fiq_debugger_probe: could not install nmi irq handler
[ [    1.351548] printk: console [ttyFIQ0] enabled
   1.351548] printk: console [ttyFIQ0] enabled
[    1.352332] printk: bootconsole [uart8250] disabled
[    1.352332] printk: bootconsole [uart8250] disabled
[    1.352886] Registered fiq debugger ttyFIQ0
[    1.353242] vcc5v0_sys: supplied by vcc12v_dcin
[    1.353380] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.353509] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.353746] vbus5v0_typec: supplied by vcc5v0_usb
[    1.353877] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.354058] vcc5v0_host: supplied by vcc5v0_usb
[    1.354563] iommu: Default domain type: Translated 
[    1.354645] rk_iommu fdab9000.iommu: version = 2
[    1.355032] rk_iommu fdb50800.iommu: version = 2
[    1.355268] rk_iommu fdb60f00.iommu: version = 2
[    1.355457] rk_iommu fdb70f00.iommu: version = 2
[    1.355626] rk_iommu fdb90480.iommu: version = 2
[    1.355807] rk_iommu fdba0800.iommu: version = 2
[    1.355992] rk_iommu fdba4800.iommu: version = 2
[    1.356173] rk_iommu fdba8800.iommu: version = 2
[    1.356357] rk_iommu fdbac800.iommu: version = 2
[    1.356539] rk_iommu fdbb0800.iommu: version = 2
[    1.356719] rk_iommu fdbdf000.iommu: version = 2
[    1.356957] rk_iommu fdbef000.iommu: version = 2
[    1.357213] rk_iommu fdc38700.iommu: version = 2
[    1.357467] rk_iommu fdc48700.iommu: version = 2
[    1.357635] rk_iommu fdd97e00.iommu: version = 2
[    1.357971] SCSI subsystem initialized
[    1.358057] usbcore: registered new interface driver usbfs
[    1.358076] usbcore: registered new interface driver hub
[    1.358093] usbcore: registered new device driver usb
[    1.358132] mc: Linux media interface: v0.10
[    1.358144] videodev: Linux video capture interface: v2.00
[    1.358173] pps_core: LinuxPPS API ver. 1 registered
[    1.358177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.358186] PTP clock support registered
[    1.358452] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.358492] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.359591] Advanced Linux Sound Architecture Driver Initialized.
[    1.359797] Bluetooth: Core ver 2.22
[    1.359814] NET: Registered protocol family 31
[    1.359818] Bluetooth: HCI device and connection manager initialized
[    1.359825] Bluetooth: HCI socket layer initialized
[    1.359829] Bluetooth: L2CAP socket layer initialized
[    1.359837] Bluetooth: SCO socket layer initialized
[    1.361145] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    1.361153] rockchip-cpuinfo cpuinfo: Serial         : 540b48857faab6f3
[    1.361510] clocksource: Switched to clocksource arch_sys_counter
[    1.646404] NET: Registered protocol family 2
[    1.646573] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.648515] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    1.648615] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.648956] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.649732] TCP: Hash tables configured (established 65536 bind 65536)
[    1.649791] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.649945] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.650163] NET: Registered protocol family 1
[    1.650406] RPC: Registered named UNIX socket transport module.
[    1.650414] RPC: Registered udp transport module.
[    1.650418] RPC: Registered tcp transport module.
[    1.650421] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.650907] PCI: CLS 0 bytes, default 64
[    1.651956] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.654194] Initialise system trusted keyrings
[    1.654269] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    1.656522] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.656791] NFS: Registering the id_resolver key type
[    1.656801] Key type id_resolver registered
[    1.656805] Key type id_legacy registered
[    1.656825] ntfs: driver 2.1.32 [Flags: R/O].
[    1.656892] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.656962] fuse: init (API version 7.32)
[    1.657103] SGI XFS with security attributes, no debug enabled
[    1.677374] NET: Registered protocol family 38
[    1.677384] Key type asymmetric registered
[    1.677389] Asymmetric key parser 'x509' registered
[    1.677405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.677410] io scheduler mq-deadline registered
[    1.677415] io scheduler kyber registered
[    1.686309] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    1.687092] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[    1.689525] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    1.689554] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    1.689721] pwm-backlight backlight: supply power not found, using dummy regulator
[    1.689742] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    1.689752] rk-pcie fe170000.pcie: IRQ msi not found
[    1.689756] rk-pcie fe170000.pcie: use outband MSI support
[    1.689761] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.689769] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    1.689798] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    1.689807] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    1.689817] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    1.689824] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    1.689848] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.689873] rk-pcie fe170000.pcie: invalid resource
[    1.689926] mpp_service mpp-srv: 15e4fdd7e064 author: Herman Chen 2022-04-13 video: rockchip: mpp: rkvenc2: Fix dchs conflict
[    1.689933] mpp_service mpp-srv: probe start
[    1.691305] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    1.691540] mpp_vdpu2 fdb50400.vdpu: probe device
[    1.691665] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.691670] vdpu_init:498: No aclk reset resource define
[    1.691675] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.691679] vdpu_init:501: No hclk reset resource define
[    1.691782] mpp_vdpu2 fdb50400.vdpu: probing finish
[    1.691976] mpp_vepu2 jpege-ccu: probing start
[    1.691983] mpp_vepu2 jpege-ccu: probing finish
[    1.692097] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    1.692190] mpp_vepu2 fdba0000.jpege-core: probing start
[    1.692316] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    1.692414] mpp_vepu2 fdba0000.jpege-core: probing finish
[    1.692496] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    1.692589] mpp_vepu2 fdba4000.jpege-core: probing start
[    1.692720] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    1.692811] mpp_vepu2 fdba4000.jpege-core: probing finish
[    1.692894] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    1.692987] mpp_vepu2 fdba8000.jpege-core: probing start
[    1.693112] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    1.693212] mpp_vepu2 fdba8000.jpege-core: probing finish
[    1.693284] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    1.693379] mpp_vepu2 fdbac000.jpege-core: probing start
[    1.693505] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    1.693596] mpp_vepu2 fdbac000.jpege-core: probing finish
[    1.693869] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    1.693969] mpp-iep2 fdbb0000.iep: probe device
[    1.694118] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    1.694204] mpp-iep2 fdbb0000.iep: probing finish
[    1.694394] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    1.694566] mpp_jpgdec fdb90000.jpegd: probe device
[    1.694771] mpp_jpgdec fdb90000.jpegd: probing finish
[    1.695128] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    1.695194] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    1.695293] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    1.695545] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    1.695680] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    1.695686] rkvdec2_init:697: No niu aclk reset resource define
[    1.695691] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    1.695695] rkvdec2_init:700: No niu hclk reset resource define
[    1.695747] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    1.695752] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    1.695837] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
[    1.695842] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
[    1.695847] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
[    1.695851] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    1.695856] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    1.695887] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    1.695974] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    1.696193] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    1.696324] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    1.696329] rkvdec2_init:697: No niu aclk reset resource define
[    1.696334] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    1.696338] rkvdec2_init:700: No niu hclk reset resource define
[    1.696376] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    1.696403] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    1.696487] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
[    1.696492] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
[    1.696496] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
[    1.696500] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    1.696505] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    1.696538] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    1.696732] mpp_rkvenc2 rkvenc-ccu: probing start
[    1.696738] mpp_rkvenc2 rkvenc-ccu: probing finish
[    1.696851] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    1.697040] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    1.697059] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    1.697214] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    1.697313] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    1.697380] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    1.697569] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    1.697587] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    1.697762] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    1.697862] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    1.698396] mpp_av1dec: Adding child /av1d@fdc70000
[    1.698646] mpp_av1dec: register device av1d-master
[    1.698669] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    1.698690] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    1.698699] mpp_av1dec av1d-master: Adding to iommu group 15
[    1.698910] mpp_av1dec av1d-master: probing start
[    1.699141] mpp_av1dec av1d-master: probing finish
[    1.699185] mpp_service mpp-srv: probe success
[    1.707939] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.707951] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.709081] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.709091] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.710213] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.710222] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.711631] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    1.711713] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    1.711780] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    1.711844] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    1.711905] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    1.712603] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.713545] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    1.715079] random: fast init done
[    1.715179] random: crng init done
[    1.715995] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[    1.723827] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    1.723843] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    1.723863] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    1.723875] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    1.724118] [drm] unsupported AFBC format[3231564e]
[    1.724164] [drm] failed to init overlay plane Cluster0-win1
[    1.724210] [drm] failed to init overlay plane Cluster1-win1
[    1.724255] [drm] failed to init overlay plane Cluster2-win1
[    1.724298] [drm] failed to init overlay plane Cluster3-win1
[    1.738356] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010f83fe0)
[    1.739079] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    1.739311] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010f8bcb8)
[    1.739976] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    1.740142] debugfs: Directory 'dw-hdmi' with parent '/' already present!
[    1.740151] dwhdmi-rockchip fdea0000.hdmi: failed to create debugfs dir!
[    1.740188] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010f8bcb8)
[    1.740662] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    1.740751] rockchip-drm display-subsystem: connector[HDMI-A-2] can't found any modes
[    1.740759] rockchip-drm display-subsystem: can't not find any logo display
[    1.740768] rockchip-drm display-subsystem: failed to show kernel logo
[    1.740796] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    1.741422] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    1.749276] brd: module loaded
[    1.753160] loop: module loaded
[    1.753433] zram: Added device: zram0
[    1.753608] lkdtm: No crash points registered, enable through debugfs
[    1.753710] system_heap: orders[0] = 6
[    1.753716] system_heap: orders[1] = 4
[    1.753721] system_heap: orders[2] = 0
[    1.755059] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    1.755152] ahci fe210000.sata: supply phy not found, using dummy regulator
[    1.755278] ahci fe210000.sata: supply target not found, using dummy regulator
[    1.755352] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    1.755377] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.755386] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.755397] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    1.756153] scsi host0: ahci
[    1.756321] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 66
[    1.756426] ahci fe230000.sata: supply ahci not found, using dummy regulator
[    1.756505] ahci fe230000.sata: supply phy not found, using dummy regulator
[    1.756624] ahci fe230000.sata: supply target not found, using dummy regulator
[    1.756690] ahci fe230000.sata: forcing port_map 0x0 -> 0x1
[    1.756714] ahci fe230000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.756723] ahci fe230000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.756731] ahci fe230000.sata: port 0 can do FBS, forcing FBSCP
[    1.757212] scsi host1: ahci
[    1.757329] ata2: SATA max UDMA/133 mmio [mem 0xfe230000-0xfe230fff] port 0x100 irq 67
[    1.758580] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    1.760039] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    1.760308] rk806 spi2.0: ON: 0x40 OFF:0x0
[    1.762247] vdd_gpu_s0: supplied by vcc5v0_sys
[    1.762967] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    1.763715] vdd_log_s0: supplied by vcc5v0_sys
[    1.764399] vdd_vdenc_s0: supplied by vcc5v0_sys
[    1.765159] vdd_ddr_s0: supplied by vcc5v0_sys
[    1.765633] vdd2_ddr_s3: supplied by vcc5v0_sys
[    1.766366] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    1.767042] vcc_3v3_s3: supplied by vcc5v0_sys
[    1.767637] vddq_ddr_s0: supplied by vcc5v0_sys
[    1.768374] vcc_1v8_s3: supplied by vcc5v0_sys
[    1.769006] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    1.769685] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    1.770289] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    1.770895] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    1.771516] nldo5_s0: supplied by vcc_1v1_nldo_s3
[    1.772196] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.773039] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.773818] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    1.774599] vcc_3v3_s0: supplied by vcc5v0_sys
[    1.775220] vccio_sd_s0: supplied by vcc5v0_sys
[    1.775842] pldo6_s3: supplied by vcc5v0_sys
[    1.776421] rk806 spi2.0: no sleep-setting state
[    1.776429] rk806 spi2.0: no reset-setting pinctrl state
[    1.776435] rk806 spi2.0: no dvs-setting pinctrl state
[    1.778818] libphy: Fixed MDIO Bus: probed
[    1.779658] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    1.779822] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
[    1.779831] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    1.779838] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
[    1.779845] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    1.779851] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[    1.779863] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    1.779871] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    1.779879] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    1.779898] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    1.780118] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    1.780216] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.780224] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
[    1.780232] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    1.780238] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    1.780245] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    1.780250] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    1.780289] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    1.780295] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.780303] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    1.780309] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    1.780315] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    1.895964] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.911515] libphy: stmmac: probed
[    1.913466] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    1.913714] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    1.913722] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    1.913729] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).
[    1.913736] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    1.913742] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    1.913753] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    1.913761] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    1.913769] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    1.913786] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    1.914009] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    1.914110] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.914118] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    1.914125] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    1.914131] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    1.914137] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    1.914143] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    1.914184] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    1.914190] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.914198] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    1.914204] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    1.914210] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    1.921530] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.948183] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.974847] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.001516] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.028182] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.044847] libphy: stmmac: probed
[    2.046684] usbcore: registered new interface driver rtl8150
[    2.046716] usbcore: registered new interface driver r8152
[    2.054863] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.060410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.060425] ehci-pci: EHCI PCI platform driver
[    2.060458] ehci-platform: EHCI generic platform driver
[    2.062915] ehci-platform fc800000.usb: EHCI Host Controller
[    2.063034] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.063108] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    2.067759] ata1: SATA link down (SStatus 0 SControl 300)
[    2.071330] ata2: SATA link down (SStatus 0 SControl 300)
[    2.074859] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.074982] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.074990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.074997] usb usb1: Product: EHCI Host Controller
[    2.075003] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.075009] usb usb1: SerialNumber: fc800000.usb
[    2.075316] hub 1-0:1.0: USB hub found
[    2.075337] hub 1-0:1.0: 1 port detected
[    2.077947] ehci-platform fc880000.usb: EHCI Host Controller
[    2.078068] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.078132] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    2.081526] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.088186] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.088288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.088296] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.088303] usb usb2: Product: EHCI Host Controller
[    2.088309] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.088315] usb usb2: SerialNumber: fc880000.usb
[    2.088585] hub 2-0:1.0: USB hub found
[    2.088604] hub 2-0:1.0: 1 port detected
[    2.089017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.089032] ohci-platform: OHCI generic platform driver
[    2.089209] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.089319] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.089374] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    2.108186] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.134853] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.148945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.148956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.148962] usb usb3: Product: Generic Platform OHCI controller
[    2.148968] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.148974] usb usb3: SerialNumber: fc840000.usb
[    2.149249] hub 3-0:1.0: USB hub found
[    2.149270] hub 3-0:1.0: 1 port detected
[    2.149594] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.149704] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.149767] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    2.208939] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.208952] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208959] usb usb4: Product: Generic Platform OHCI controller
[    2.208965] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.208971] usb usb4: SerialNumber: fc8c0000.usb
[    2.209247] hub 4-0:1.0: USB hub found
[    2.209269] hub 4-0:1.0: 1 port detected
[    2.209949] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.209962] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.210080] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    2.210179] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.210209] xhci-hcd xhci-hcd.9.auto: irq 121, io mem 0xfc400000
[    2.210370] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.210378] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.210384] usb usb5: Product: xHCI Host Controller
[    2.210390] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.210396] usb usb5: SerialNumber: xhci-hcd.9.auto
[    2.210674] hub 5-0:1.0: USB hub found
[    2.210695] hub 5-0:1.0: 1 port detected
[    2.210866] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.210967] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    2.210979] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    2.211018] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.211079] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.211086] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.211092] usb usb6: Product: xHCI Host Controller
[    2.211098] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.211104] usb usb6: SerialNumber: xhci-hcd.9.auto
[    2.211370] hub 6-0:1.0: USB hub found
[    2.211389] hub 6-0:1.0: 1 port detected
[    2.211641] usbcore: registered new interface driver cdc_acm
[    2.211648] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.211752] usbcore: registered new interface driver uas
[    2.211821] usbcore: registered new interface driver usb-storage
[    2.211869] usbcore: registered new interface driver usbserial_generic
[    2.211885] usbserial: USB Serial support registered for generic
[    2.211910] usbcore: registered new interface driver cp210x
[    2.211923] usbserial: USB Serial support registered for cp210x
[    2.211965] usbcore: registered new interface driver ftdi_sio
[    2.211979] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.212089] usbcore: registered new interface driver keyspan
[    2.212103] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.212117] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.212130] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.212143] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.212171] usbcore: registered new interface driver option
[    2.212184] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.212338] usbcore: registered new interface driver oti6858
[    2.212351] usbserial: USB Serial support registered for oti6858
[    2.212374] usbcore: registered new interface driver pl2303
[    2.212387] usbserial: USB Serial support registered for pl2303
[    2.212418] usbcore: registered new interface driver qcserial
[    2.212431] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.212469] usbcore: registered new interface driver sierra
[    2.212483] usbserial: USB Serial support registered for Sierra USB modem
[    2.213054] usbcore: registered new interface driver usbtouchscreen
[    2.214119] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.7.auto/input/input0
[    2.214497] i2c /dev entries driver
[    2.217708] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.225796] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.234497] vdd_npu_s0: supplied by vcc5v0_sys
[    2.263347] rtc-hym8563 6-0051: rtc information is valid
[    2.268817] rtc-hym8563 6-0051: registered as rtc0
[    2.269858] rtc-hym8563 6-0051: setting system clock to 2000-01-01T00:28:49 UTC (946686529)
[    2.275550] usbcore: registered new interface driver uvcvideo
[    2.275564] USB Video Class driver (1.1.1)
[    2.276873] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.277539] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.277923] Bluetooth: HCI UART driver ver 2.3
[    2.277931] Bluetooth: HCI UART protocol H4 registered
[    2.277937] Bluetooth: HCI UART protocol ATH3K registered
[    2.277975] usbcore: registered new interface driver bfusb
[    2.278007] usbcore: registered new interface driver btusb
[    2.278404] cpu cpu0: leakage=10
[    2.279938] cpu cpu0: pvtm=1435
[    2.280029] cpu cpu0: pvtm-volt-sel=2
[    2.280580] cpu cpu4: leakage=8
[    2.287176] cpu cpu4: pvtm=1669
[    2.291171] cpu cpu4: pvtm-volt-sel=1
[    2.292469] cpu cpu6: leakage=8
[    2.299019] cpu cpu6: pvtm=1673
[    2.302973] cpu cpu6: pvtm-volt-sel=1
[    2.304756] cpu cpu0: avs=0
[    2.305637] cpu cpu4: avs=0
[    2.306477] cpu cpu6: avs=0
[    2.306769] cpu cpu0: EM: created perf domain
[    2.306832] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.307538] cpu cpu4: EM: created perf domain
[    2.307594] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.309891] cpu cpu6: EM: created perf domain
[    2.310319] cpu cpu6: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.318115] sdhci: Secure Digital Host Controller Interface driver
[    2.318137] sdhci: Copyright(c) Pierre Ossman
[    2.318144] Synopsys Designware Multimedia Card Interface Driver
[    2.318893] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.319522] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.319562] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.319574] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.319611] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
[    2.320308] leds-gpio: probe of leds failed with error -16
[    2.320419] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.320468] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.321247] cryptodev: driver 1.12 loaded.
[    2.321296] hid: raw HID events driver (C) Jiri Kosina
[    2.321543] usbcore: registered new interface driver usbhid
[    2.321552] usbhid: USB HID core driver
[    2.324866] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.332647] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.333194] optee: probing for conduit method.
[    2.333214] optee: revision 3.13 (8e053a88)
[    2.333554] optee: initialized driver
[    2.334119] usbcore: registered new interface driver snd-usb-audio
[    2.346348] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    2.347883] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2
[    2.348620] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.349028] input: headset-keys as /devices/platform/es8388-sound/input/input3
[    2.361777] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    2.385870] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.386252] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB 
[    2.386385] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
[    2.386498] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
[    2.386602] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB, chardev (236:0)
[    2.389079]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[    2.412849] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card2/input4
[    2.414136] Initializing XFRM netlink socket
[    2.414485] NET: Registered protocol family 10
[    2.415249] Segment Routing with IPv6
[    2.415302] NET: Registered protocol family 17
[    2.415319] NET: Registered protocol family 15
[    2.415583] Bluetooth: RFCOMM socket layer initialized
[    2.415602] Bluetooth: RFCOMM ver 1.11
[    2.415615] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.415625] Bluetooth: HIDP socket layer initialized
[    2.415662] [BT_RFKILL]: Enter rfkill_rk_init
[    2.415670] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.416211] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.416245] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.416254] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275P
[    2.416261] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.416268] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.416290] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
[    2.416318] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.416325] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.416333] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.416341] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.416659] Key type dns_resolver registered
[    2.417800] Loading compiled-in X.509 certificates
[    2.418416] pstore: Using crash dump compression: deflate
[    2.418680] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.418869] rga: rga3_core0_irq, irq = 32, match scheduler
[    2.419093] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    2.419115] rga: rga3_core0 probe successfully
[    2.419453] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.419605] rga: rga3_core1_irq, irq = 33, match scheduler
[    2.419813] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    2.419832] rga: rga3_core1 probe successfully
[    2.420176] rga: rga2_irq, irq = 34, match scheduler
[    2.420366] rga: rga2 driver loaded successfully ver:3.2.63318
[    2.420378] rga: rga2 probe successfully
[    2.420699] rga: Module initialized. v1.2.7
[    2.434429] vendor storage:20190527 ret = 0
[    2.456387] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.456593] mali fb000000.gpu: Kernel DDK version g11p0-01eac0
[    2.457750] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.458443] mali fb000000.gpu: leakage=13
[    2.458483] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.459694] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.459994] mali fb000000.gpu: pvtm=875
[    2.460048] mali fb000000.gpu: pvtm-volt-sel=2
[    2.460723] vcc3v3_lcd0_n: supplied by vcc_1v8_s3
[    2.461001] mali fb000000.gpu: avs=0
[    2.461653] vcc3v3_pcie30: supplied by vcc_3v3_s0
[    2.461819] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.462269] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
[    2.462280] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.462381] mali fb000000.gpu: No priority control manager is configured
[    2.462393] mali fb000000.gpu: No memory group manager is configured
[    2.462421] mali fb000000.gpu: Protected memory allocator not available
[    2.463112] mali fb000000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.463235] input: adc-keys as /devices/platform/adc-keys/input/input5
[    2.464085] mali fb000000.gpu: Probed as mali0
[    2.464927] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    2.468282] RKNPU fdab0000.npu: Adding to iommu group 0
[    2.468427] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    2.469892] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    2.469926] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    2.469942] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    2.470577] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
[    2.472923] RKNPU fdab0000.npu: leakage=7
[    2.473409] usb 1-1: New USB device found, idVendor=1a86, idProduct=55d5, bcdDevice=80.46
[    2.473422] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.473429] usb 1-1: Product: USB Quad_Serial
[    2.473435] usb 1-1: Manufacturer: wch.cn
[    2.473441] usb 1-1: SerialNumber: 0123456789
[    2.477925] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[    2.480095] RKNPU fdab0000.npu: pvtm=849
[    2.481439] cdc_acm 1-1:1.2: ttyACM1: USB ACM device
[    2.484176] RKNPU fdab0000.npu: pvtm-volt-sel=1
[    2.484763] cdc_acm 1-1:1.4: ttyACM2: USB ACM device
[    2.484907] RKNPU fdab0000.npu: avs=0
[    2.485070] RKNPU fdab0000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.488370] cdc_acm 1-1:1.6: ttyACM3: USB ACM device
[    2.492644] RKNPU fdab0000.npu: failed to find power_model node
[    2.492665] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    2.492673] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    2.493075] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.495196] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.495826] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.495838] cfg80211: failed to load regulatory.db
[    2.496823] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    2.497729] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:01:29', on 'Aug 10 2022'.
[    2.498071] Mali: 
[    2.498074] Mali device driver loaded
[    2.498087] ALSA device list:
[    2.498094]   #0: rockchip-hdmi0
[    2.498101]   #1: rockchip-hdmi1
[    2.498107]   #2: rockchip-es8388
[    2.498114]   #3: rockchip,hdmiin
[    2.511671] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    2.511894] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    2.511914] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.511929] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    2.511945] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
[    2.511959] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    2.511972] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    2.512019] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    2.512050] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.512122] pci 0002:20:00.0: supports D1 D2
[    2.512135] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.515091] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.515096] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.515243] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
[    2.515320] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    2.515367] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    2.515831] pci 0002:21:00.0: supports D1 D2
[    2.515834] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.522088] EXT4-fs (mmcblk1p6): recovery complete
[    2.522615] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.522663] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    2.522945] devtmpfs: mounted
[    2.525572] Freeing unused kernel memory: 6208K
[    2.537598] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.537655] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
[    2.537675] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    2.537698] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
[    2.537752] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
[    2.537802] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.537817] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
[    2.540931] pcieport 0002:20:00.0: PME: Signaling with IRQ 134
[    2.545194] Run /sbin/init as init process
[    2.572644] EXT4-fs (mmcblk1p6): re-mounted. Opts: (null)
Starting syslogd: OK
[    2.609464] usb 5-1: New USB device found, idVendor=0424, idProduct=2734, bcdDevice= 2.02
[    2.609507] usb 5-1: New USB devicStarting klogd: e strings: Mfr=1, Product=2, SerialNumber=0
[    2.609522] usb 5-1: Product: USB2734
[    2.609535] usb 5-1: Manufacturer: Microchip Tech
OK
Running sysctl: OK
/usr/bin/modetest
[    2.659562] hub 5-1:1.0: USB hub found
[    2.659649] hub 5-1:1.0: 5 ports detected
Populating /dev using udev: [    2.675445] udevd[278]: starting version 3.2.10
[    2.690661] udevd[279]: starting eudev-3.2.10
[    2.738250] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.758619] usb 6-1: New USB device found, idVendor=0424, idProduct=5734, bcdDevice= 2.02
[    2.758656] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    2.758667] usb 6-1: Product: USB5734
[    2.758676] usb 6-1: Manufacturer: Microchip Tech
[    2.787290] hub 6-1:1.0: USB hub found
[    2.787367] hub 6-1:1.0: 5 ports detected
done
Initializing random number generator: OK
Saving random seed: OK
Will now mount all partitions in /etc/fstab
