DDR Version V1.06 20220224
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gbdb740d4da-220216 #cjh (Feb 24 2022 - 03:15:33)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 1
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(4e081b1b07...) + OK
## Checking uboot 0x00200000 ... sha256(4ded8b645f...) + OK
## Checking fdt 0x00320438 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(6a00298af8...) + OK
## Checking atf-3 0xff100000 ... sha256(19762d10e3...) + OK
## Checking atf-4 0xff009000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(603cfbd25d...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 86.233 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-331-g7380d9813:derrick.huang
NOTICE:  BL31: Built : 19:33:36, Mar 24 2022
INFO:    timer_hp_init no valid 32k timer source, use normal mode
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC: 
I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-dirty # (Aug 06 2022 - 15:34:09 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb57000
Relocation fdt: eb9fa108 - eb9fecd0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big0_s0 675000 uV
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big1_s0 675000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_npu_s0 837500 uV
spi2: RK806: 2
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: HSZN RK3588 R1V1 Board
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
hdmi@fdea0000 disconnected
CLK: (uboot. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
  b0pll 1200000 KHz
  b1pll 1200000 KHz
  lpll 1200000 KHz
  v0pll 24000 KHz
  aupll 786215 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth1: ethernet@fe1c0000, eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe9a71ac0 with size 0x01d87600
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe9a98ec0
     Data Size:    30801928 Bytes = 29.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   b7fbfecb93da51eee3ca8f0b36b850d335551a1c7202ad24d3dbdc32f1407122
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at e9a71ac0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe9a722c0
     Data Size:    158681 Bytes = 155 KiB
     Architecture: AArch64
     Load Address: 0x0a100000
     Hash algo:    sha256
     Hash value:   46cf24351d9d1e8491634228d2a946f6cc93de0fac76b3537510f96658a66aac
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0a100000 to 0x0a100000
   Booting using the fdt blob at 0x0a100000
   Loading Kernel Image from 0xe9a98ec0 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02160008
  'reserved-memory' cma: addr=10000000 size=10000000
   Using Device Tree in place at 000000000a100000, end 000000000a129bd8
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 525.675 ms

Starting kernel ...

[    0.637293] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.637316] Linux version 5.10.66 (root@1760bd274111) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Wed Aug 10 08:57:46 CST 2022
[    0.647813] Machine model: HSZN RK3588 R1V1 Board
[    0.647882] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.651939] printk: bootconsole [uart8250] enabled
[    0.657948] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.659093] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.659836] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.804493] Zone ranges:
[    0.804741]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.805315]   DMA32    empty
[    0.805584]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.806155] Movable zone start for each node
[    0.806548] Early memory node ranges
[    0.806879]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.807456]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.808034]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.808613] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.852329] psci: probing for conduit method from DT.
[    0.852803] psci: PSCIv1.1 detected in firmware.
[    0.853228] psci: Using standard PSCI v0.2 function IDs
[    0.853711] psci: Trusted OS migration not required
[    0.854163] psci: SMC Calling Convention v1.2
[    0.854951] percpu: Embedded 30 pages/cpu s85352 r8192 d29336 u122880
[    0.855739] Detected VIPT I-cache on CPU0
[    0.856153] CPU features: detected: GIC system register CPU interface
[    0.856747] CPU features: detected: Virtualization Host Extensions
[    0.857320] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.857965] alternatives: patching kernel code
[    0.858672] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.859310] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
[    0.862668] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.863857] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.864578] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.872471] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    0.946247] Memory: 7591456K/8108032K available (14910K kernel code, 3200K rwdata, 5684K rodata, 6208K init, 521K bss, 254432K reserved, 262144K cma-reserved)
[    0.947692] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.948325] ftrace: allocating 56587 entries in 222 pages
[    1.048929] ftrace: allocated 222 pages with 6 groups
[    1.049694] rcu: Hierarchical RCU implementation.
[    1.050132] rcu:     RCU event tracing is enabled.
[    1.050550]  Rude variant of Tasks RCU enabled.
[    1.050968] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.057061] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.059750] GICv3: GIC: Using split EOI/Deactivate mode
[    1.060235] GICv3: 480 SPIs implemented
[    1.060589] GICv3: 0 Extended SPIs implemented
[    1.061023] GICv3: Distributor has no Range Selector support
[    1.061550] GICv3: 16 PPIs implemented
[    1.061939] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.062699] ITS [mem 0xfe640000-0xfe65ffff]
[    1.063140] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)
[    1.064028] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)
[    1.064982] ITS: using cache flushing for cmd queue
[    1.065465] ITS [mem 0xfe660000-0xfe67ffff]
[    1.065898] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)
[    1.066784] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)
[    1.067737] ITS: using cache flushing for cmd queue
[    1.068347] GICv3: using LPI property table @0x0000000100230000
[    1.069036] GIC: using cache flushing for LPI property table
[    1.069563] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000
[    1.070398] random: get_random_bytes called from start_kernel+0x3dc/0x5d0 with crng_init=0
[    1.206768] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.208094] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.209086] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.210943] Console: colour dummy device 80x25
[    1.211380] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.212332] pid_max: default: 32768 minimum: 301
[    1.212904] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.213619] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.216054] rcu: Hierarchical SRCU implementation.
[    1.217333] Platform MSI: msi-controller@fe640000 domain created
[    1.217932] Platform MSI: msi-controller@fe660000 domain created
[    1.218806] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.219592] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.220850] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.222557] Detected VIPT I-cache on CPU1
[    1.222596] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.222614] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000
[    1.222662] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.224005] Detected VIPT I-cache on CPU2
[    1.224039] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.224057] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000
[    1.224103] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.225442] Detected VIPT I-cache on CPU3
[    1.225471] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.225489] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000
[    1.225531] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.226844] CPU features: detected: Spectre-v4
[    1.226848] Detected PIPT I-cache on CPU4
[    1.226864] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.226875] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000
[    1.226903] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.228166] Detected PIPT I-cache on CPU5
[    1.228184] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.228195] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000
[    1.228224] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.229516] Detected PIPT I-cache on CPU6
[    1.229533] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.229543] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000
[    1.229571] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.230821] Detected PIPT I-cache on CPU7
[    1.230838] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.230849] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000
[    1.230877] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.230957] smp: Brought up 1 node, 8 CPUs
[    1.247699] SMP: Total of 8 processors activated.
[    1.248133] CPU features: detected: Privileged Access Never
[    1.248648] CPU features: detected: User Access Override
[    1.249138] CPU features: detected: 32-bit EL0 Support
[    1.249619] CPU features: detected: Common not Private translations
[    1.250198] CPU features: detected: RAS Extension Support
[    1.250697] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.251489] CPU features: detected: CRC32 instructions
[    1.251963] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.252608] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.253241] CPU: All CPU(s) started at EL2
[    1.255043] devtmpfs: initialized
[    1.265787] Registered cp15_barrier emulation handler
[    1.266265] Registered setend emulation handler
[    1.266768] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.267686] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.270932] pinctrl core: initialized pinctrl subsystem
[    1.271845] NET: Registered protocol family 16
[    1.273172] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.273947] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.275255] thermal_sys: Registered thermal governor 'fair_share'
[    1.275258] thermal_sys: Registered thermal governor 'step_wise'
[    1.275825] thermal_sys: Registered thermal governor 'user_space'
[    1.276384] thermal_sys: Registered thermal governor 'power_allocator'
[    1.277083] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.278471] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.279244] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.280017] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.280789] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.281563] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.282329] cpuidle: using governor menu
[    1.282700] Registered FIQ tty driver
[    1.283208] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.283967] ASID allocator initialised with 65536 entries
[    1.286268] printk: console [ramoops-1] enabled
[    1.286691] pstore: Registered ramoops as persistent store backend
[    1.287266] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.332205] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.333041] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.333849] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.334675] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.335522] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.336167] rockchip-pinctrl pinctrl: probed pinctrl
[    1.349569] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.350085] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.350623] fiq_debugger_probe: could not install nmi irq handler
[[    1.351237] printk: console [ttyFIQ0] enabled
    1.351237] printk: console [ttyFIQ0] enabled
[    1.352022] printk: bootconsole [uart8250] disabled
[    1.352022] printk: bootconsole [uart8250] disabled
[    1.352545] Registered fiq debugger ttyFIQ0
[    1.352914] vcc5v0_sys: supplied by vcc12v_dcin
[    1.353055] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.353180] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.353427] vbus5v0_typec: supplied by vcc5v0_usb
[    1.353556] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.353736] vcc5v0_host: supplied by vcc5v0_usb
[    1.354212] iommu: Default domain type: Translated 
[    1.354295] rk_iommu fdab9000.iommu: version = 2
[    1.354675] rk_iommu fdb50800.iommu: version = 2
[    1.354911] rk_iommu fdb60f00.iommu: version = 2
[    1.355097] rk_iommu fdb70f00.iommu: version = 2
[    1.355263] rk_iommu fdb90480.iommu: version = 2
[    1.355445] rk_iommu fdba0800.iommu: version = 2
[    1.355631] rk_iommu fdba4800.iommu: version = 2
[    1.355807] rk_iommu fdba8800.iommu: version = 2
[    1.355991] rk_iommu fdbac800.iommu: version = 2
[    1.356174] rk_iommu fdbb0800.iommu: version = 2
[    1.356391] rk_iommu fdbdf000.iommu: version = 2
[    1.356632] rk_iommu fdbef000.iommu: version = 2
[    1.356886] rk_iommu fdc38700.iommu: version = 2
[    1.357144] rk_iommu fdc48700.iommu: version = 2
[    1.357293] rk_iommu fdd97e00.iommu: version = 2
[    1.357614] SCSI subsystem initialized
[    1.357697] usbcore: registered new interface driver usbfs
[    1.357716] usbcore: registered new interface driver hub
[    1.357734] usbcore: registered new device driver usb
[    1.357774] mc: Linux media interface: v0.10
[    1.357786] videodev: Linux video capture interface: v2.00
[    1.357818] pps_core: LinuxPPS API ver. 1 registered
[    1.357822] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.357830] PTP clock support registered
[    1.358096] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.358135] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.359245] Advanced Linux Sound Architecture Driver Initialized.
[    1.359450] Bluetooth: Core ver 2.22
[    1.359465] NET: Registered protocol family 31
[    1.359470] Bluetooth: HCI device and connection manager initialized
[    1.359476] Bluetooth: HCI socket layer initialized
[    1.359481] Bluetooth: L2CAP socket layer initialized
[    1.359489] Bluetooth: SCO socket layer initialized
[    1.360763] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    1.360770] rockchip-cpuinfo cpuinfo: Serial         : 540b48857faab6f3
[    1.361137] clocksource: Switched to clocksource arch_sys_counter
[    1.644755] NET: Registered protocol family 2
[    1.644926] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.646874] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    1.646975] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.647317] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.648102] TCP: Hash tables configured (established 65536 bind 65536)
[    1.648162] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.648315] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.648535] NET: Registered protocol family 1
[    1.648757] RPC: Registered named UNIX socket transport module.
[    1.648762] RPC: Registered udp transport module.
[    1.648766] RPC: Registered tcp transport module.
[    1.648769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.649208] PCI: CLS 0 bytes, default 64
[    1.650266] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.652772] Initialise system trusted keyrings
[    1.652842] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    1.655109] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.655400] NFS: Registering the id_resolver key type
[    1.655412] Key type id_resolver registered
[    1.655416] Key type id_legacy registered
[    1.655433] ntfs: driver 2.1.32 [Flags: R/O].
[    1.655496] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.655566] fuse: init (API version 7.32)
[    1.655716] SGI XFS with security attributes, no debug enabled
[    1.676728] NET: Registered protocol family 38
[    1.676738] Key type asymmetric registered
[    1.676742] Asymmetric key parser 'x509' registered
[    1.676759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.676764] io scheduler mq-deadline registered
[    1.676768] io scheduler kyber registered
[    1.685707] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    1.686494] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[    1.688968] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    1.689024] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    1.689115] pwm-backlight backlight: supply power not found, using dummy regulator
[    1.689309] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    1.689331] rk-pcie fe170000.pcie: IRQ msi not found
[    1.689341] rk-pcie fe170000.pcie: use outband MSI support
[    1.689344] mpp_service mpp-srv: 15e4fdd7e064 author: Herman Chen 2022-04-13 video: rockchip: mpp: rkvenc2: Fix dchs conflict
[    1.689348] mpp_service mpp-srv: probe start
[    1.689354] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.689367] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    1.689396] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    1.689417] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    1.689438] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    1.689455] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    1.689490] rk-pcie fe170000.pcie: Missing *config* reg space
[    1.689527] rk-pcie fe170000.pcie: invalid resource
[    1.690731] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    1.690952] mpp_vdpu2 fdb50400.vdpu: probe device
[    1.691074] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.691079] vdpu_init:498: No aclk reset resource define
[    1.691084] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    1.691088] vdpu_init:501: No hclk reset resource define
[    1.691212] mpp_vdpu2 fdb50400.vdpu: probing finish
[    1.691407] mpp_vepu2 jpege-ccu: probing start
[    1.691413] mpp_vepu2 jpege-ccu: probing finish
[    1.691528] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    1.691619] mpp_vepu2 fdba0000.jpege-core: probing start
[    1.691743] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    1.691837] mpp_vepu2 fdba0000.jpege-core: probing finish
[    1.691922] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    1.692013] mpp_vepu2 fdba4000.jpege-core: probing start
[    1.692142] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    1.692229] mpp_vepu2 fdba4000.jpege-core: probing finish
[    1.692310] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    1.692405] mpp_vepu2 fdba8000.jpege-core: probing start
[    1.692531] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    1.692621] mpp_vepu2 fdba8000.jpege-core: probing finish
[    1.692691] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    1.692785] mpp_vepu2 fdbac000.jpege-core: probing start
[    1.692913] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    1.692999] mpp_vepu2 fdbac000.jpege-core: probing finish
[    1.693271] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    1.693370] mpp-iep2 fdbb0000.iep: probe device
[    1.693517] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    1.693600] mpp-iep2 fdbb0000.iep: probing finish
[    1.693790] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    1.693963] mpp_jpgdec fdb90000.jpegd: probe device
[    1.694160] mpp_jpgdec fdb90000.jpegd: probing finish
[    1.694519] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    1.694582] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    1.694681] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    1.694931] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    1.695068] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    1.695073] rkvdec2_init:697: No niu aclk reset resource define
[    1.695079] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    1.695083] rkvdec2_init:700: No niu hclk reset resource define
[    1.695134] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    1.695139] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    1.695224] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
[    1.695229] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
[    1.695233] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
[    1.695237] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    1.695243] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    1.695273] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    1.695358] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    1.695582] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    1.695711] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    1.695716] rkvdec2_init:697: No niu aclk reset resource define
[    1.695721] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    1.695725] rkvdec2_init:700: No niu hclk reset resource define
[    1.695763] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    1.695790] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    1.695873] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
[    1.695878] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
[    1.695882] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
[    1.695886] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    1.695891] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    1.695922] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    1.696119] mpp_rkvenc2 rkvenc-ccu: probing start
[    1.696125] mpp_rkvenc2 rkvenc-ccu: probing finish
[    1.696240] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    1.696425] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    1.696445] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    1.696595] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    1.696693] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    1.696758] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    1.696948] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    1.696966] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    1.697140] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    1.697235] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    1.697757] mpp_av1dec: Adding child /av1d@fdc70000
[    1.698022] mpp_av1dec: register device av1d-master
[    1.698043] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    1.698064] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    1.698074] mpp_av1dec av1d-master: Adding to iommu group 15
[    1.698284] mpp_av1dec av1d-master: probing start
[    1.698520] mpp_av1dec av1d-master: probing finish
[    1.698560] mpp_service mpp-srv: probe success
[    1.707331] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.707343] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.708471] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.708481] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.709606] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.709616] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.711010] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    1.711083] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    1.711169] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    1.711244] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    1.711307] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    1.712004] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.712942] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    1.714480] random: fast init done
[    1.714545] random: crng init done
[    1.715550] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[    1.723445] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    1.723461] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    1.723480] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    1.723492] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    1.723732] [drm] unsupported AFBC format[3231564e]
[    1.723779] [drm] failed to init overlay plane Cluster0-win1
[    1.723826] [drm] failed to init overlay plane Cluster1-win1
[    1.723871] [drm] failed to init overlay plane Cluster2-win1
[    1.723915] [drm] failed to init overlay plane Cluster3-win1
[    1.738032] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010f83fe0)
[    1.738814] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    1.739041] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010f8bcb8)
[    1.739681] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[    1.739848] debugfs: Directory 'dw-hdmi' with parent '/' already present!
[    1.739857] dwhdmi-rockchip fdea0000.hdmi: failed to create debugfs dir!
[    1.739894] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010f8bcb8)
[    1.740378] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    1.740467] rockchip-drm display-subsystem: connector[HDMI-A-2] can't found any modes
[    1.740476] rockchip-drm display-subsystem: can't not find any logo display
[    1.740485] rockchip-drm display-subsystem: failed to show kernel logo
[    1.740511] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    1.741065] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    1.748905] brd: module loaded
[    1.752780] loop: module loaded
[    1.753052] zram: Added device: zram0
[    1.753227] lkdtm: No crash points registered, enable through debugfs
[    1.753361] system_heap: orders[0] = 6
[    1.753367] system_heap: orders[1] = 4
[    1.753372] system_heap: orders[2] = 0
[    1.754867] ahci fe210000.sata: supply ahci not found, using dummy regulator
[    1.754953] ahci fe210000.sata: supply phy not found, using dummy regulator
[    1.755078] ahci fe210000.sata: supply target not found, using dummy regulator
[    1.755156] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
[    1.755181] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.755190] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.755202] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
[    1.756039] scsi host0: ahci
[    1.756205] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 66
[    1.756309] ahci fe230000.sata: supply ahci not found, using dummy regulator
[    1.756391] ahci fe230000.sata: supply phy not found, using dummy regulator
[    1.756508] ahci fe230000.sata: supply target not found, using dummy regulator
[    1.756572] ahci fe230000.sata: forcing port_map 0x0 -> 0x1
[    1.756595] ahci fe230000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.756604] ahci fe230000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst 
[    1.756613] ahci fe230000.sata: port 0 can do FBS, forcing FBSCP
[    1.757168] scsi host1: ahci
[    1.757284] ata2: SATA max UDMA/133 mmio [mem 0xfe230000-0xfe230fff] port 0x100 irq 67
[    1.758516] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    1.759977] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    1.760226] rk806 spi2.0: ON: 0x40 OFF:0x0
[    1.762188] vdd_gpu_s0: supplied by vcc5v0_sys
[    1.762987] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    1.763790] vdd_log_s0: supplied by vcc5v0_sys
[    1.764581] vdd_vdenc_s0: supplied by vcc5v0_sys
[    1.765458] vdd_ddr_s0: supplied by vcc5v0_sys
[    1.765928] vdd2_ddr_s3: supplied by vcc5v0_sys
[    1.766745] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    1.767501] vcc_3v3_s3: supplied by vcc5v0_sys
[    1.768104] vddq_ddr_s0: supplied by vcc5v0_sys
[    1.768926] vcc_1v8_s3: supplied by vcc5v0_sys
[    1.769598] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    1.770360] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    1.771010] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    1.771665] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    1.772318] nldo5_s0: supplied by vcc_1v1_nldo_s3
[    1.773073] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.773982] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    1.774798] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    1.775604] vcc_3v3_s0: supplied by vcc5v0_sys
[    1.776246] vccio_sd_s0: supplied by vcc5v0_sys
[    1.776895] pldo6_s3: supplied by vcc5v0_sys
[    1.777467] rk806 spi2.0: no sleep-setting state
[    1.777476] rk806 spi2.0: no reset-setting pinctrl state
[    1.777482] rk806 spi2.0: no dvs-setting pinctrl state
[    1.779892] libphy: Fixed MDIO Bus: probed
[    1.780733] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    1.780893] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
[    1.780902] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    1.780909] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x43).
[    1.780916] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    1.780922] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[    1.780933] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    1.780942] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    1.780950] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    1.780967] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    1.781193] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    1.781362] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.781371] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
[    1.781378] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    1.781384] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    1.781390] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    1.781396] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    1.781435] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    1.781441] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.781449] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    1.781455] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    1.781461] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    1.895634] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.914484] libphy: stmmac: probed
[    1.916529] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    1.916775] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    1.916784] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    1.916791] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).
[    1.916798] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    1.916804] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    1.916815] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    1.916823] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    1.916831] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    1.916848] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    1.917071] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    1.917211] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.917220] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    1.917227] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    1.917233] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    1.917239] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    1.917244] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    1.917284] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    1.917290] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.917297] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    1.917303] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    1.917309] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    1.921164] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.947834] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    1.974504] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.001169] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.027835] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.047811] libphy: stmmac: probed
[    2.049716] usbcore: registered new interface driver rtl8150
[    2.049750] usbcore: registered new interface driver r8152
[    2.054495] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.063400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.063451] ehci-pci: EHCI PCI platform driver
[    2.063519] ehci-platform: EHCI generic platform driver
[    2.066228] ehci-platform fc800000.usb: EHCI Host Controller
[    2.066432] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.066574] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    2.067592] ata1: SATA link down (SStatus 0 SControl 300)
[    2.070920] ata2: SATA link down (SStatus 0 SControl 300)
[    2.077847] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.078096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.078113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.078125] usb usb1: Product: EHCI Host Controller
[    2.078137] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.078148] usb usb1: SerialNumber: fc800000.usb
[    2.078667] hub 1-0:1.0: USB hub found
[    2.078716] hub 1-0:1.0: 1 port detected
[    2.081746] ehci-platform fc880000.usb: EHCI Host Controller
[    2.081943] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.082053] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    2.084499] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.094513] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.094742] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.094758] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.094771] usb usb2: Product: EHCI Host Controller
[    2.094783] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
[    2.094794] usb usb2: SerialNumber: fc880000.usb
[    2.095282] hub 2-0:1.0: USB hub found
[    2.095331] hub 2-0:1.0: 1 port detected
[    2.096250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.096276] ohci-platform: OHCI generic platform driver
[    2.096612] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.096808] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.096911] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    2.111174] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.137838] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.155358] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.155384] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.155397] usb usb3: Product: Generic Platform OHCI controller
[    2.155409] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.155420] usb usb3: SerialNumber: fc840000.usb
[    2.155910] hub 3-0:1.0: USB hub found
[    2.155959] hub 3-0:1.0: 1 port detected
[    2.156635] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.156815] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.156924] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    2.215360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.215385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.215398] usb usb4: Product: Generic Platform OHCI controller
[    2.215410] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
[    2.215421] usb usb4: SerialNumber: fc8c0000.usb
[    2.215919] hub 4-0:1.0: USB hub found
[    2.215973] hub 4-0:1.0: 1 port detected
[    2.217418] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.217441] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.217638] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    2.217795] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.217866] xhci-hcd xhci-hcd.9.auto: irq 121, io mem 0xfc400000
[    2.218215] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.218232] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.218244] usb usb5: Product: xHCI Host Controller
[    2.218256] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.218267] usb usb5: SerialNumber: xhci-hcd.9.auto
[    2.218750] hub 5-0:1.0: USB hub found
[    2.218798] hub 5-0:1.0: 1 port detected
[    2.219176] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    2.219368] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    2.219392] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    2.219488] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.219645] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.219662] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.219674] usb usb6: Product: xHCI Host Controller
[    2.219686] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
[    2.219697] usb usb6: SerialNumber: xhci-hcd.9.auto
[    2.220209] hub 6-0:1.0: USB hub found
[    2.220265] hub 6-0:1.0: 1 port detected
[    2.220774] usbcore: registered new interface driver cdc_acm
[    2.220788] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.220999] usbcore: registered new interface driver uas
[    2.221188] usbcore: registered new interface driver usb-storage
[    2.221289] usbcore: registered new interface driver usbserial_generic
[    2.221322] usbserial: USB Serial support registered for generic
[    2.221375] usbcore: registered new interface driver cp210x
[    2.221405] usbserial: USB Serial support registered for cp210x
[    2.221503] usbcore: registered new interface driver ftdi_sio
[    2.221539] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.221800] usbcore: registered new interface driver keyspan
[    2.221832] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.221862] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.221891] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.221920] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.221979] usbcore: registered new interface driver option
[    2.222009] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.222378] usbcore: registered new interface driver oti6858
[    2.222416] usbserial: USB Serial support registered for oti6858
[    2.222471] usbcore: registered new interface driver pl2303
[    2.222502] usbserial: USB Serial support registered for pl2303
[    2.222572] usbcore: registered new interface driver qcserial
[    2.222603] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.222689] usbcore: registered new interface driver sierra
[    2.222726] usbserial: USB Serial support registered for Sierra USB modem
[    2.223972] usbcore: registered new interface driver usbtouchscreen
[    2.225818] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.7.auto/input/input0
[    2.226474] i2c /dev entries driver
[    2.230537] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.239151] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.249017] vdd_npu_s0: supplied by vcc5v0_sys
[    2.279214] rtc-hym8563 6-0051: rtc information is valid
[    2.284668] rtc-hym8563 6-0051: registered as rtc0
[    2.285708] rtc-hym8563 6-0051: setting system clock to 2000-01-01T00:27:05 UTC (946686425)
[    2.291364] usbcore: registered new interface driver uvcvideo
[    2.291377] USB Video Class driver (1.1.1)
[    2.292698] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.293366] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.293744] Bluetooth: HCI UART driver ver 2.3
[    2.293753] Bluetooth: HCI UART protocol H4 registered
[    2.293759] Bluetooth: HCI UART protocol ATH3K registered
[    2.293793] usbcore: registered new interface driver bfusb
[    2.293830] usbcore: registered new interface driver btusb
[    2.294212] cpu cpu0: leakage=10
[    2.295755] cpu cpu0: pvtm=1434
[    2.295870] cpu cpu0: pvtm-volt-sel=1
[    2.296495] cpu cpu4: leakage=8
[    2.303128] cpu cpu4: pvtm=1670
[    2.307163] cpu cpu4: pvtm-volt-sel=1
[    2.308468] cpu cpu6: leakage=8
[    2.315014] cpu cpu6: pvtm=1673
[    2.318965] cpu cpu6: pvtm-volt-sel=1
[    2.320756] cpu cpu0: avs=0
[    2.321647] cpu cpu4: avs=0
[    2.322483] cpu cpu6: avs=0
[    2.322778] cpu cpu0: EM: created perf domain
[    2.322840] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.323682] cpu cpu4: EM: created perf domain
[    2.323735] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.326319] cpu cpu6: EM: created perf domain
[    2.326739] cpu cpu6: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.327824] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.332054] sdhci: Secure Digital Host Controller Interface driver
[    2.332070] sdhci: Copyright(c) Pierre Ossman
[    2.332075] Synopsys Designware Multimedia Card Interface Driver
[    2.332638] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.333135] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.333168] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.333180] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.333216] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
[    2.333718] leds-gpio: probe of leds failed with error -16
[    2.333827] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.333858] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.334449] cryptodev: driver 1.12 loaded.
[    2.334492] hid: raw HID events driver (C) Jiri Kosina
[    2.334652] usbcore: registered new interface driver usbhid
[    2.334658] usbhid: USB HID core driver
[    2.339313] optee: probing for conduit method.
[    2.339327] optee: revision 3.13 (8e053a88)
[    2.339633] optee: initialized driver
[    2.340020] usbcore: registered new interface driver snd-usb-audio
[    2.345778] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    2.347327] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2
[    2.347973] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.349188] input: headset-keys as /devices/platform/es8388-sound/input/input3
[    2.362607] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    2.363704] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.401673] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.402476] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB 
[    2.402698] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
[    2.402898] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
[    2.403257] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB, chardev (236:0)
[    2.406560]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[    2.414052] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card2/input4
[    2.415182] Initializing XFRM netlink socket
[    2.415510] NET: Registered protocol family 10
[    2.416193] Segment Routing with IPv6
[    2.416241] NET: Registered protocol family 17
[    2.416258] NET: Registered protocol family 15
[    2.416409] Bluetooth: RFCOMM socket layer initialized
[    2.416427] Bluetooth: RFCOMM ver 1.11
[    2.416440] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.416450] Bluetooth: HIDP socket layer initialized
[    2.416481] [BT_RFKILL]: Enter rfkill_rk_init
[    2.416489] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.416971] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.416997] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.417004] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275P
[    2.417010] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.417016] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.417034] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
[    2.417056] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.417061] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.417068] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.417074] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.417320] Key type dns_resolver registered
[    2.418224] Loading compiled-in X.509 certificates
[    2.418802] pstore: Using crash dump compression: deflate
[    2.419066] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.419255] rga: rga3_core0_irq, irq = 32, match scheduler
[    2.419568] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    2.419589] rga: rga3_core0 probe successfully
[    2.419937] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.420091] rga: rga3_core1_irq, irq = 33, match scheduler
[    2.420326] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    2.420344] rga: rga3_core1 probe successfully
[    2.420680] rga: rga2_irq, irq = 34, match scheduler
[    2.420924] rga: rga2 driver loaded successfully ver:3.2.63318
[    2.420936] rga: rga2 probe successfully
[    2.421314] rga: Module initialized. v1.2.7
[    2.437665] vendor storage:20190527 ret = 0
[    2.455280] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.455375] mali fb000000.gpu: Kernel DDK version g11p0-01eac0
[    2.456500] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.457498] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.457705] mali fb000000.gpu: leakage=13
[    2.458159] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.459075] vcc3v3_lcd0_n: supplied by vcc_1v8_s3
[    2.459151] mali fb000000.gpu: pvtm=874
[    2.459179] mali fb000000.gpu: pvtm-volt-sel=2
[    2.459718] mali fb000000.gpu: avs=0
[    2.459953] vcc3v3_pcie30: supplied by vcc_3v3_s0
[    2.460130] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.460398] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
[    2.460406] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.460477] mali fb000000.gpu: No priority control manager is configured
[    2.460484] mali fb000000.gpu: No memory group manager is configured
[    2.460499] mali fb000000.gpu: Protected memory allocator not available
[    2.461092] input: adc-keys as /devices/platform/adc-keys/input/input5
[    2.461155] mali fb000000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.461999] mali fb000000.gpu: Probed as mali0
[    2.465254] RKNPU fdab0000.npu: Adding to iommu group 0
[    2.465370] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    2.466694] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    2.466718] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    2.466731] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    2.467124] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
[    2.469121] RKNPU fdab0000.npu: leakage=7
[    2.471168] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    2.476288] RKNPU fdab0000.npu: pvtm=849
[    2.479569] usb 1-1: New USB device found, idVendor=1a86, idProduct=55d5, bcdDevice=80.46
[    2.479599] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.479608] usb 1-1: Product: USB Quad_Serial
[    2.479616] usb 1-1: Manufacturer: wch.cn
[    2.479624] usb 1-1: SerialNumber: 0123456789
[    2.480837] RKNPU fdab0000.npu: pvtm-volt-sel=1
[    2.481566] RKNPU fdab0000.npu: avs=0
[    2.481701] RKNPU fdab0000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.485746] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[    2.489068] RKNPU fdab0000.npu: failed to find power_model node
[    2.489085] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    2.489092] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    2.489437] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.491082] cdc_acm 1-1:1.2: ttyACM1: USB ACM device
[    2.492998] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.493610] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.493621] cfg80211: failed to load regulatory.db
[    2.494599] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    2.495528] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:01:29', on 'Aug 10 2022'.
[    2.495887] Mali: 
[    2.495890] Mali device driver loaded
[    2.495903] ALSA device list:
[    2.495910]   #0: rockchip-hdmi0
[    2.495917]   #1: rockchip-hdmi1
[    2.495924]   #2: rockchip-es8388
[    2.495930]   #3: rockchip,hdmiin
[    2.496795] cdc_acm 1-1:1.4: ttyACM2: USB ACM device
[    2.502350] cdc_acm 1-1:1.6: ttyACM3: USB ACM device
[    2.521155] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    2.521320] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    2.521331] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.521339] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    2.521347] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
[    2.521354] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    2.521361] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    2.521392] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    2.521414] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.521469] pci 0002:20:00.0: supports D1 D2
[    2.521476] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.526670] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.526680] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.526875] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
[    2.526960] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[    2.527013] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    2.527501] pci 0002:21:00.0: supports D1 D2
[    2.527508] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.530726] EXT4-fs (mmcblk1p6): recovery complete
[    2.531209] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    2.531257] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    2.531539] devtmpfs: mounted
[    2.534119] Freeing unused kernel memory: 6208K
[    2.542867] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.542913] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
[    2.542923] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    2.542936] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
[    2.542981] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
[    2.543024] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.543033] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
[    2.544927] pcieport 0002:20:00.0: PME: Signaling with IRQ 134
[    2.561449] Run /sbin/init as init process
[    2.595633] EXT4-fs (mmcblk1p6): re-mounted. Opts: (null)
[    2.618450] usb 5-1: New USB device found, idVendor=0424, idProduct=2734, bcdDevice= 2.02
[    2.618481] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.618490] usb 5-1: Product: USB2734
[    2.618499] usb 5-1: Manufacturer: Microchip Tech
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
/usr/bin/modetest
[    2.667657] hub 5-1:1.0: USB hub found
[    2.667723] hub 5-1:1.0: 5 ports detected
Populating /dev using udev: [    2.701927] udevd[280]: starting version 3.2.10
[    2.719495] udevd[281]: starting eudev-3.2.10
[    2.741233] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.758238] usb 6-1: New USB device found, idVendor=0424, idProduct=5734, bcdDevice= 2.02
[    2.758264] usb 6-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    2.758271] usb 6-1: Product: USB5734
[    2.758277] usb 6-1: Manufacturer: Microchip Tech
[    2.779665] hub 6-1:1.0: USB hub found
[    2.779733] hub 6-1:1.0: 5 ports detected
done
Initializing random number generator: OK
Saving random seed: OK
Will now mount all partitions in /etc/fstab
